System

System Device
	In this field, you can configure the basic information of your print server.
	Server Name : Assign a name to the print server.
	Location (optional) : Assign a location for the print server.
	Admin Contact (optional) : Assign the Admin Contact's name for the print server.
	Password :  Enter the Administrator password (3-8 characters). To set up the password, please enter the password in the New Password box, and then enter the same one again in the Confirm Again box.

Port Setting
	In this field, you can assign the Port Name for the print server, and the description for the LPT port. It also allows you to select the Printer Speed setting (High or Low) and the PJL Printer setting (Yes or No). NOTE: PJL (Print Job Language) has certain job requirements that must be met to work correctly. For more information, please refer to your printer's manual.

TIP :

Once you have changed the settings in each option, click Apply to store the settings, or Cancel to abandon.

Network

TCP/IP
	This field contains three options that allow you to configure the TCP/IP setting: IP Address, UPnP, and MAC Rendezvous.
	IP Addres : This option allows you to set the IP address manually or automatically. When you choose Manually Assign,you should enter the related information in the following boxes, including IP Address, Subnet Mask, and Default Gateway.
	UPnP : This option allows you to enable or disable UPnP mode.
	MAC Rendezvous : This option allows you to enable or disable MAC Rendezvous mode.

Microsoft Network
	Enter the name of the Workgroup that you want the print server associated with in this field.

AppleTalk
	Enter the AppleTalk Zone name in the box. In the following options, enter the related configuration, such as the printer type.
	LPT
	Chooser Name : Display the print server's port name.
	Printer Type : Enter the printer's type in this box.
	PostScript Level : Select from the pull-down menu (Level 1 or Level 2).
	Font Group : Select from the pull-down menu.

TIP :

Once you have changed the settings in each option, click Apply to store the settings, or Cancel to abandon.

User

Printing Control
	By configuring the Enable User Printing Control option (Yes or No), the user in the User List is permitted to access the print server or not. For the user(s) who is not in the User List, will not be allowed to access the print server.

TIP :

Once you have changed the settings in each option, click Apply to store the settings, or Cancel to abandon.

Define Users
	You can add/delete the user(s) to/from the User List. The User List at the bottom of the screen displays the current defined user and related information for the print server.

SNMP

SNMP Management
	SNMP (Simple Network Management Protocol) is a set of protocols for managing complex networks.
	Community 1/2/3 : Enter a name in the Name box, and configure the Access Right by selecting Read Only or Read/Write from the pull-down menu.

TIP :

Once you have changed the settings in each option, click Apply to store the settings, or Cancel to abandon.